MS51974/NASM51974

Military/Aerospace Socket Set Screw - Hex Cone Point - Alloy, Cad Plated

FED. SUP CLASS
5305

APPROVED 29 JAN 1964     REVISED (A) 10 SEP 1969 (B) 29 DEC 1972

NOMINAL SIZE .086 .112 .138 .164 .190 .250 .3125 .375 .500
THREADS PER INCH (UNF_3A) 64 48 40 36 32 28 24 24 20
J SOCKET WIDTH
ACROSS FLATS
NOW .035 .050 .062 .078 .094 .125 .156 .188 .250


Y CONE POINT DIAMETER 118°+2° FOR LENGTHS UNDER
90°+2° FOR LENGTHS AND OVER
.109 .156 .188 .250 .250 .312 .375 .438 .562
L LENGTH TOL DASH NUMBER
PLAIN PLAIN PLAIN PLAIN PLAIN SELF-LOCKING PLAIN SELF-LOCKING PLAIN SELF-LOCKING PLAIN SELF-LOCKING PLAIN SELF-LOCKING
.125
.188
.250
.312
.375

.438
.500
.562
.625
+.010 1*
2*
8*
9*
10*
16*
17*
18*
19*
25*
26*
27*
28*

34*
35*
36*
37*


38*
101
102
103
104
105

106*
107
108*
109


44*
45*
46*


47*

48*

112*
113
114
115

116*
117
118*
119



55*
56*

57*

58*


125*
126
127


128

129




65*


66*

67*




137


138

139







74*

75*




147*


148

149
.750
.875
1.000
1.250

1.500
1.750
2.000
+.020 110

111
49* 120
121
122
123

124
59* 130
131
132
133

134
135
136
68* 140
141
142
143

144
145
146
76* 150
151
152
153

154
155
156
2.500
3.000
+.031 157
158
(B)
  • Inactive for new design after 29 DEC 1972 .
(B) For changes see sheets 1 and 2.
P.A WC
Order Cust
AS
82
TITLE
SETSCREW - HEXAGON SOCKET, CONE POINT,
ALLOY STEEL, CADMIUM PLATED, UNF - 3A
PLAIN AND SELF - LOCKING          (B)
MILITARY STANDARD
MS 51974
PROCUREMENT SPECIFICATION
FF-S-200
SUPERSEDES MS51035, MS51037 and in part MS18067, BCTX2.4, BCTX2.5, BCTX2.12, BCUX2, BCUX1 and BCTX4.3. SHEET       1       of       2
FED. SUP CLASS
5305

APPROVED 29 JAN 1964     REVISED (A) 10 SEP 1969 (B) FOR CHANGES SEE PAGES 1 AND 2.

    NOTES:
  1. MATERIAL : ALLOY STEEL IN ACCORDANCE WITH PROCUREMENT SPECIFICATION, HAVING A ROCKWELL HARDNESS OF C45-53
  2. PROACTIVE COATING: CADMIUM PLATED IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.
  3. THREADS:THE THREADS SHALLL BE IN ACCORDANCE WITH MIL-S-7742.
  4. DIMENTIONS:ALL DIMENTIONS ARE IN INCHES, UNLESS OTHERWISE SPECIFIED.
  5. PART NUMBER: THE PART NUMBER CONSISTS OF THE MS NUMBER, PLUS THE DASH NUMBER.
    EXAMPLE: MS51974-34.
  6. SELF-LOCKING ELEMENT:
    1. The self-lockingh element shall be in accordance with MIL-F-18240.

    2. For design and usage limitations, see MS15981.
    3. Location of effective loacking area shall be in accordance with MS15981.
    4. Maximum ring gage diameter that loacking region of serscrew must pass thru freely or with finger pressure shall be the nominal size pluse 0.010.
    5. MIL-F-18240 doesn't establis torque requirement for lengths above the dashed line. Only a positive indication of torque is required.
  7. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID.
  8. FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN.








INTERCHANGEABILITY

Screws covered by the dash numbers given in MS51035 and MS51037 are cancelled after 29 January 1964 and superseded by screws covered on MS51974 having same dash number. Cancelled screws may be used until existing stock are depleted. Use only the MS51974 screws for new design.

Screws covered by the dash numbers given in MS18067 in part are cancelled.
Cancelled screws may be used until existing stock are depleted. Use only the superseded screws for new design. Replacement shall be in accordance with Table II.
TABLE II (B)
CANCELLED SUSPERSENDING CANCELLED SUSPERSENDING CANCELLED SUSPERSENDING CANCELLED SUSPERSENDING
MS18067 MS51974 MS18067 MS51974 MS18067 MS51974 MS18067 MS51974
DASH NUMBER DASH NUMBER DASH NUMBER DASH NUMBER
4
8
13
19
25
31
36
44
49
56

68
9
14
20
26
101
102
103
104
105

106
107
108
109
110
111
112
113
114
115
32
17
45
50
57

63
69
73
77
15

22
27
38
51
58
116
117
118
119
120

121
122
123
124
125

126
127
128
129
130
64
70
74
78
81

84
91
39
52
59

65
71
75
79
131
132
133
134
135

136
137
138
139
140

141
142
143
144
82
85
92
40
53

60
66
72
76
80

83
86
87
88
145
146
147
148
149

150
151
152
153
154

155
156
157
158
P.A WC
Order Cust
AS
82
TITLE
SETSCREW - HEXAGON SOCKET, CONE POINT,
ALLOY STEEL, CADMIUM PLATED, UNF - 3A
PLAIN AND SELF - LOCKING          (B)
MILITARY STANDARD
MS 51974
PROCUREMENT SPECIFICATION
FF-S-200
SUPERSEDES MS51035, MS51037 and in part MS18067, BCTX2.4, BCTX2.5, BCTX2.12, BCUX2, BCUX1 and BCTX4.3. SHEET       2       of       2

All prints are for reference purpose only. CAM-TECH manufactures to the latest revision.

Fill Out the Form